Member Center       Download

Follow us

Free newsletter sign up

Sign up to our free newsletter and get the latest 

news sent direct to your inbox

Etta Biotech Co., Ltd.  Copyright © 2014-2018 All Rights Reserved.   苏ICP备13031692号-4

Subscribe

Support

FAQs
Answer: 1 Ideal transfection efficiency and high cell viability can be achieved, under a rather uniform electric field with a lower voltage. 2 Applied for for cell numbers in the range of...
Answer: The electroporation system is mainly based on the type of cells and the type of electrodes used. The common electroporation system of 96-well plate electrode needles is 1×106...
Answer: The ratio of GFP positive cells in total living cells is detected by the flow cytometry (BD Accuri C6) as the transfection efficiency.
Answer: Yes, it does have using age limited. Since the matrix electrode is made of biocompatible stainless steel materials, which has been removed non-biocompatible ions such as manganese, chromium ..
Answer: No. A series of experimental tests show that, when the diameter of needle electrodes was adjusted to 400 μm, the liquor tension between two adjacent electrodes could be eliminated. So ...
Answer: It includes electrode type, voltage (V), pulse duration (μs), interval time, and pulse number (ms).
Answer: About 15m. Besides the pad we supplied, others PC installed the Etta APP could also control the device.
Answer: As our consumbles are sterile, and the whole process is conducted in a clean bench, ensuring a sterile process. And,if the electrodes are reused, treat them with the 75% alcohol ...
Answer: Yes, we can. Some of our clients have already electroporated successfully the Cas9 protein. In the meantime, we have also accumulated a wealth of experience through a series of RNAs and ...
Answer: The mainly cell applicable scope of the Etta Biotech electroporator are eukaryocytes ( zooblast, plant protoplas without cell wall). As the novel High-density distributed electrode network ...
Answer: Yes, we can. But the transfected efficiency may not as high as the cells on suspension condition, for the contact areas between the electrodes and the adherent culture cells are smaller ...
Answer: The Etta biotech electroporation buffers are generally suit for various kinds of cell. This is different from others brand buffer, as they must choose the specific buffer for different ...
>
leave a feedback